Aim-TTi LD400P DC 360W 80A 80V Elektronisk belastning
22,674 incl. VAT
Använd vår chatt för personlig support. Eller kontakta oss via +45 31 33 18 19 eller salg@GOmeasure.dk
- Allsidig lösning för testning av likströmskällor
- Konstant ström, motstånd, ledningsförmåga, spänning och effektlägen
- Bred spännings- och strömområde, 0 till 80V och 0 till 80A
- 400 watt kontinuerlig avledning vid 28°C (360W vid 40°C)
- 600 watt kortvarig avledning (upp till 60 sekunder)
- Låg minimi driftspänning på <1V vid 40A
- Hög upplösning och noggrannhet för nivåinställning
- Inbyggd transientgenerator med variabel stigning
- Strömmätarutgång för vågformsvisning
- Variabel frånkopplingsspänning för batteritestning
- Högupplöst bakgrundsbelyst grafisk LCD med mjuknyckelkontroll
- Analog fjärrkontroll av nivåer och TTL-kontroll av på/av och transientväxling
- Fram- och bakre ingångsterminaler (främre terminaler max. 30A)
- Fullständig busskontroll via USB, RS232 och LXI-kompatibla LAN-gränssnitt (LD400P)
- GPIB-alternativ (endast LD400P)
Upptäck möjligheterna
Mer information
Beskrivning
Aim-TTi LD400P DC 360W 80A 80V Electronic Load
The Aim-TTi LD400P adds full bus remote control via USB, RS-232, GPIB and LAN (Ethernet) interfaces.Remote control for system applications
The LD400P incorporates USB, RS232 and LXI compliant LAN interfaces with GPIB available as an option. These provide full remote control and read-back capabilities and are supported by an IVI driver for high level language applications.LOW MINIMUM OPERATING VOLTAGE
The Aim-TTi LD400 can operate at voltages below 500mV for currents up to 10 amps. At higher currents the fixed minimum resistance (typically better than 25mΩ) gradually raises the minimum operating voltage, but it remains below 1 volt up to 40 amps and below 2 volts up to 80 amps. This low operating voltage allows it to be used for many low voltage applications for which other electronic loads are unsuitable.600 WATTS INTERMITTENT POWER
The LD400 can operate at power levels up to 600 watts for periods of up to 1 minute. Short term loading can be sufficient for many testing applications and significantly extends the usefulness of the LD400.COMPACT ELECTRONIC DC LOADS
The LD series features electronic loads which are suitable for testing and characterising a wide variety of dc power sources. They can be used to investigate the behavior of many different types of power source such as PFCs, batteries and solar cells, as well as electronic power supply units. The wide voltage/current range, multiple operating modes and built-in transient generator give them versatility to offer test solutions from the design laboratory through to the component test areaHIGH RESOLUTION SETTING/MEASUREMENT
The two operating levels for each operating mode are settable to high precision. Levels are displayed using four digit meters which provide resolution down to 1mA, 1mV and 1mW. The meters have an accuracy of 0.1% for voltage and 0.2% for current.ADJUSTABLE VOLTAGE DROPOUT
Some power sources, such as rechargeable batteries, can be damaged if their output voltage falls below a certain level. The LD series provides automatic protection by incorporating fully variable voltage dropout. If the voltage applied to the load falls below a preset level, the load current is rapidly reduced to zero.For more information: Aim-TTi LD400 Series
Dokument
Aim-TTi LD400P DC 360W 80A 80V Electronic Load
Aim-TTi LD400 Series DatasheetAlternativ
Video
Aim-TTi LD400P DC 360W 80A 80V Electronic Load
The Aim-TTi LD400P adds full bus remote control via USB, RS-232, GPIB and LAN (Ethernet) interfaces.Remote control for system applications
The LD400P incorporates USB, RS232 and LXI compliant LAN interfaces with GPIB available as an option. These provide full remote control and read-back capabilities and are supported by an IVI driver for high level language applications.LOW MINIMUM OPERATING VOLTAGE
The Aim-TTi LD400 can operate at voltages below 500mV for currents up to 10 amps. At higher currents the fixed minimum resistance (typically better than 25mΩ) gradually raises the minimum operating voltage, but it remains below 1 volt up to 40 amps and below 2 volts up to 80 amps. This low operating voltage allows it to be used for many low voltage applications for which other electronic loads are unsuitable.600 WATTS INTERMITTENT POWER
The LD400 can operate at power levels up to 600 watts for periods of up to 1 minute. Short term loading can be sufficient for many testing applications and significantly extends the usefulness of the LD400.COMPACT ELECTRONIC DC LOADS
The LD series features electronic loads which are suitable for testing and characterising a wide variety of dc power sources. They can be used to investigate the behavior of many different types of power source such as PFCs, batteries and solar cells, as well as electronic power supply units. The wide voltage/current range, multiple operating modes and built-in transient generator give them versatility to offer test solutions from the design laboratory through to the component test areaHIGH RESOLUTION SETTING/MEASUREMENT
The two operating levels for each operating mode are settable to high precision. Levels are displayed using four digit meters which provide resolution down to 1mA, 1mV and 1mW. The meters have an accuracy of 0.1% for voltage and 0.2% for current.ADJUSTABLE VOLTAGE DROPOUT
Some power sources, such as rechargeable batteries, can be damaged if their output voltage falls below a certain level. The LD series provides automatic protection by incorporating fully variable voltage dropout. If the voltage applied to the load falls below a preset level, the load current is rapidly reduced to zero.For more information: Aim-TTi LD400 Series