Aim-TTi PL303QMD-P Power Supply Dual 0-30V/0-3A
Använd vår chatt för personlig support. Eller kontakta oss via +45 31 33 18 19 eller salg@GOmeasure.dk
- Enkel, dubbel eller trippel utgångsmodeller
- Modeller från 6V/8A upp till 60V/1.5A
- Linjär reglering - för bästa prestanda
- Ultrakompakt design - tar upp mindre plats
- Äkta analoga kontroller - för enkel användning
- S-Lås funktion - lås inställningar omedelbart
- V-Span funktion - anpassa spänningsområdet
- Låg strömområde och genomsnittlig ström mätning
- DC utgångsbrytare och "visa gränser" knapp
- Valbara fjärrsensorterminaler
- Oberoende, isolerad spårning, förhållandespårning och äkta parallelläge på dubbla och trippelmodeller
- Hög ström låg spänningsutgång på trippelutgångsmodellen
Upptäck möjligheterna
Mer information
Beskrivning
Aim-TTi PL303QMD-P Power Supply Dual 0-30V/0-3A
Compact Dimensions
The Aim-TTi PL303QMD-P is a dual output power supply with the same high power density as the single output models - 180 watts from a half rack 3U sized casing (214mm x 131mm).Four Modes of Operation
The PL303QMD-P is more than just two PL303 single power supplies in one box. It has four modes of operation: Independent, Isolated Tracking, Isolated Ratio Tracking, and True Parallel.Independent Mode: The two outputs are completely independent and electrically isolated from each other.
Isolated Tracking Mode: The two outputs remain electrically isolated, but the voltage control of the Master output sets an identical voltage on the Slave output
Isolated Ratio Tracking Mode: As normal tracking, but the Slave voltage can be set to any percentage of the Master voltage and retains that ratio as the Master voltage is varied.
True Parallel Mode: All of the power is channelled to the Master output which can then supply up to 6 amps.
Simultaneous Output Control
The Both On/Both Off buttons are in addition to the individual switches for each output, and allow both outputs to be turned on or off synchronously by a single button press. Synchronous switching of the outputs is of increasing importance for circuitry which can be damaged if one voltage rail is present without the other.Building on the success of a winning formula
In the 1980s the original PL series transformed customer expectations of the bench power supply and set a format that has been extensively copied by other manufacturers. Over the years, the PL series has been steadily revised and extended. Hundreds of thousands of PL series units are currently in use across the world and it remains the laboratory power supply of choice for many organisations.TTi has been at the forefront of laboratory power supply design for around thirty years during which it has re-defined the state-of-the-art for switch mode products with its innovative Mixed-mode and PowerFlex regulator designs. Continuing development of linear models has generated the lower cost EL series, and the advanced QL series. However, demand for the PL series has remained strong - demonstrating how well it has met the needs of its many customers. Now TTi has engineered an all-new design which retains all the key features of the original PL series, but combines them with new and important features.
For more information: Aim-TTI PL Series
Dokument
Aim-TTi PL303QMD-P Power Supply Dual 0-30V/0-3A
Aim-TTi PL + PL-P Series DatasheetAlternativ
Video
Aim-TTi PL303QMD-P Power Supply Dual 0-30V/0-3A
Compact Dimensions
The Aim-TTi PL303QMD-P is a dual output power supply with the same high power density as the single output models - 180 watts from a half rack 3U sized casing (214mm x 131mm).Four Modes of Operation
The PL303QMD-P is more than just two PL303 single power supplies in one box. It has four modes of operation: Independent, Isolated Tracking, Isolated Ratio Tracking, and True Parallel.Independent Mode: The two outputs are completely independent and electrically isolated from each other.
Isolated Tracking Mode: The two outputs remain electrically isolated, but the voltage control of the Master output sets an identical voltage on the Slave output
Isolated Ratio Tracking Mode: As normal tracking, but the Slave voltage can be set to any percentage of the Master voltage and retains that ratio as the Master voltage is varied.
True Parallel Mode: All of the power is channelled to the Master output which can then supply up to 6 amps.
Simultaneous Output Control
The Both On/Both Off buttons are in addition to the individual switches for each output, and allow both outputs to be turned on or off synchronously by a single button press. Synchronous switching of the outputs is of increasing importance for circuitry which can be damaged if one voltage rail is present without the other.Building on the success of a winning formula
In the 1980s the original PL series transformed customer expectations of the bench power supply and set a format that has been extensively copied by other manufacturers. Over the years, the PL series has been steadily revised and extended. Hundreds of thousands of PL series units are currently in use across the world and it remains the laboratory power supply of choice for many organisations.TTi has been at the forefront of laboratory power supply design for around thirty years during which it has re-defined the state-of-the-art for switch mode products with its innovative Mixed-mode and PowerFlex regulator designs. Continuing development of linear models has generated the lower cost EL series, and the advanced QL series. However, demand for the PL series has remained strong - demonstrating how well it has met the needs of its many customers. Now TTi has engineered an all-new design which retains all the key features of the original PL series, but combines them with new and important features.
For more information: Aim-TTI PL Series