Tektronix P6701B Optical Probe
Använd vår chatt för personlig support. Eller kontakta oss via +45 31 33 18 19 eller salg@GOmeasure.dk
- Bandbredd - ≥1.0 GHz
Upptäck möjligheterna
Mer information
Beskrivning
Small, conveniently packaged P6701B and P6703B optical-to-electrical analog converters provide an accurate interface for optical pulse shape measurements.
Funktioner och fördelar
- Broad Wavelength Response 500 to 950 nm or 1100 to 1700 nm
- High-bandwidth DC up to 1.2 GHz
- High Gain 1 V/mW
- Low Noise
- Probe Connects to DPO7000 1 and DPO/MSO70000 2 Series
- SONET/SDH and Fibre Channel Reference Receiver Performance:
- TDS500C/700C (Opt. 3C or 4C)
- P6701B – Fibre Channel up to 1063 Mb/s
- P6703B – SONET/SDH up to 622 Mb/s
1Requires the TPA-to-BNC adapter
2Requires the TCA-to-BNC adapter
Ansökningar
- Eye Pattern Testing of Optical Communication Signals (SONET/SDH and Fibre Channel)
Product description
The Tektronix P6700 Series optical-to-electrical (O/E) converters change optical signals into electrical signals for convenient analysis on Tektronix DPO7000 and DPO/MSO70000 Series oscilloscopes with appropriate adapters (see footnote 1 and 2), any other Tektronix oscilloscope equipped with a TekProbe interface, or when used with the 1103 TekProbe power supply. The P6700 Series O/E converters are ideal for optical source characterization in the development, manufacture, or service of optical communication systems and devices.
Small, conveniently packaged P6701B and P6703B optical-to-electrical analog converters provide an accurate interface for optical pulse shape measurements. The high gain, large dynamic range, and stable output offset of these O/E converters make them ideal for performing eye pattern analysis and extinction measurements.
The P6701B/P6703B optical input is a 1 meter, 62.5μ Multi Mode fiber with an FC/PC connector. Using the standard assortment of hybrid fiber-optic mating sleeves, these O/Es can accommodate the various industry connector standards.
The TekProbe interface provides power, auto-scaling, auto-termination, and correct units (microwatts) when used with Tektronix DPO7000 or DPO/MSO70000 and earlier TekProbe-equipped Series oscilloscopes.
Prestanda du kan räkna med
Beroende på Tektronix för att ge dig prestanda du kan räkna med. Förutom branschledande service och support kommer denna produkt tillbaka av ett års garanti som standard.
The standard P6701B has a nominal frequency response which follows the fourth-order Bessel-Thompson for Fibre Channel 1063 Mb/s. The 1103 TekProbe power supply can be used to connect these products to the DSA8300 Series sampling oscilloscopes.
Dokument
Datablad:
Alternativ
Video
Small, conveniently packaged P6701B and P6703B optical-to-electrical analog converters provide an accurate interface for optical pulse shape measurements.
Funktioner och fördelar
- Broad Wavelength Response 500 to 950 nm or 1100 to 1700 nm
- High-bandwidth DC up to 1.2 GHz
- High Gain 1 V/mW
- Low Noise
- Probe Connects to DPO7000 1 and DPO/MSO70000 2 Series
- SONET/SDH and Fibre Channel Reference Receiver Performance:
- TDS500C/700C (Opt. 3C or 4C)
- P6701B – Fibre Channel up to 1063 Mb/s
- P6703B – SONET/SDH up to 622 Mb/s
1Requires the TPA-to-BNC adapter
2Requires the TCA-to-BNC adapter
Ansökningar
- Eye Pattern Testing of Optical Communication Signals (SONET/SDH and Fibre Channel)
Product description
The Tektronix P6700 Series optical-to-electrical (O/E) converters change optical signals into electrical signals for convenient analysis on Tektronix DPO7000 and DPO/MSO70000 Series oscilloscopes with appropriate adapters (see footnote 1 and 2), any other Tektronix oscilloscope equipped with a TekProbe interface, or when used with the 1103 TekProbe power supply. The P6700 Series O/E converters are ideal for optical source characterization in the development, manufacture, or service of optical communication systems and devices.
Small, conveniently packaged P6701B and P6703B optical-to-electrical analog converters provide an accurate interface for optical pulse shape measurements. The high gain, large dynamic range, and stable output offset of these O/E converters make them ideal for performing eye pattern analysis and extinction measurements.
The P6701B/P6703B optical input is a 1 meter, 62.5μ Multi Mode fiber with an FC/PC connector. Using the standard assortment of hybrid fiber-optic mating sleeves, these O/Es can accommodate the various industry connector standards.
The TekProbe interface provides power, auto-scaling, auto-termination, and correct units (microwatts) when used with Tektronix DPO7000 or DPO/MSO70000 and earlier TekProbe-equipped Series oscilloscopes.
Prestanda du kan räkna med
Beroende på Tektronix för att ge dig prestanda du kan räkna med. Förutom branschledande service och support kommer denna produkt tillbaka av ett års garanti som standard.
The standard P6701B has a nominal frequency response which follows the fourth-order Bessel-Thompson for Fibre Channel 1063 Mb/s. The 1103 TekProbe power supply can be used to connect these products to the DSA8300 Series sampling oscilloscopes.